Related Links









[PRINT] Print Page
[ENQ] Online Enquiry Form
Follow GJG Electronics on Twitter Follow us on Twitter
Find GJG Electronics on LinkedIn Find us on Linked In


RTC - Industrial Real Time Clocks

The RTC range of real time clocks feature high-visibility red LED display units providing clear viewing for distances of up to 180m. Digit sizes from 2.3" (58mm) up to 18" (457mm).

Although red LEDs are used as standard, the displays can optionally be constructed using green, amber or blue LEDs. Please contact us for a quotation.
RTC22 Real Time Display

Sealed to IP65 (NEMA 4, 4X) as standard, the RTC range is housed in a waterproof, corrosion resistant enclosure constructed of aluminium and polypropylene. All models can be linked to one of our Time Receivers which allow the internal battery-backed real time clock in the display to be synchronised with an atomic clock for the best possible accuracy. Double, triple, quad and quin-sided versions are also available - ideal to cover large areas where 360° viewing is required. Please contact us for a quotation if non-standard colours are required. Multiple time formet options are available, typically HOURS : MINUTES or HRS : MINS : SECS are the most popular, however other formats can easily be accomodated.

Large Digit Display Clock Models Features

  •   Wall or Panel Mounting options
  •   Digit heights 2.3"(58mm), 4"(102mm), 6"(152mm), 8"(203mm), 12"(305mm), 14"(355mm), 16"405mm), 18"(457mm)
  •   Viewing distances from 65ft(20meters) to 600ft(180meters).
  •   Multiple sides options, double, triple, quad or more.
  •   4 digit time HRS:MINS or 6 digit HRS:MINS:SECS
  •   Selectable 12 or 24 hour clock options
  •   On board battery back up in the event of power loss
  •   Sealed to IP65 (NEMA 4, 4x) as standard
  •   Support for up to 30 slave clocks

RTC95 - GPS Timecode Receiver

The GPS Time Receiver allows our range of industrial real time clocks to be synchronised with a GPS satellite orbiting the Earth. This unit can be used world-wide (wherever GPS signals can be received) and will set the clock to UTC (Universal Coordinated Time). The correct time zone can then be set from the menu system of the real time display.

Power Supply Options

  •   100-260Vac, 24Vac
  •   12Vdc, 24Vdc

Alarm Output Options

  •   Fully isolated from input and power
  •   2 Alarms rated 5A 250VAC, SPST (Selectable NO/NC)
  •   4 Alarms rated 2A 250VAC, SPST (Selectable NO/NC)
  •   Analogue Output (0-20/4-20mA, 0-10V, -10 to +10V)
  •   2 Alarms rated 5A 250VAC, SPDT

Serial Output Options

  •   RS-232, RS-422, RS-485